ABR® Waterless Fireplace Cleaner

In stock

A peel-able cleaning coating designed to remove soot, dirt and grime from your fireplace surround.
Simply apply, let dry and peel the dirt away.
For use on interior and exterior brick, textured stone, concrete, marble, ceramic, terrazzo, slate, limestone, tile and granite.
This removable coating requires NO water in its application or removal.

Coverage: 30 to 50 sq. ft./gal. at 1/8” – 1/4″
Size: 1 Gallon
ABRP, Inc. processing time: 2-3 business days
Shipping turnaround time: 3-4 business days

Note: We do not ship this product in the winter due to freezing temperatures.

Dealer Locater

SKU: WPFCB Category: Clean & Restore

Description

ABR Waterless Fireplace Cleaner™ is a temporary cleaning coating designed to remove soot, dirt and grime from your fireplace. Simply apply, let dry and peel the dirt away. This removable coating requires no water in its application or removal. ABR Waterless Fireplace Cleaner™ collects dirt and contaminants removed from the substrate surface within the coating for easy collection and disposal.

ABR Waterless Fireplace Cleaner™ may be used on interior and exterior surfaces including, but not limited to, brick, textured stone, concrete, marble, ceramic, terrazzo, slate, limestone, tile and granite. The creamy consistency and opaque color of the ABR Waterless Fireplace Cleaner™ allows for an even and “easy to see” application.

Additional information

Weight	8 lbs
PRECAUTIONS:	ABR Waterless Fireplace Cleaner™ contains latex (a natural fluid produced by the rubber tree) and may cause allergic reactions in some people. Symptoms include an itchy rash, redness, blisters and scaling, or in more severe cases, dropping blood pressure, swelling of the throat and tongue and difficulty breathing. Seek immediate medical attention if symptoms persist.
INSTALLATION LIMITATIONS:	INSTALLATION LIMITATIONS: ABR Waterless Fireplace Cleaner™ should not be applied when the air or surface temperature is below 50°F, or if rain or heavy moisture is forecasted. Do not thin. Do not apply to carpeting or fabric. Do not apply to raw, painted, unpainted, stained or varnished wood. Do not use inside firebox. Do not use while fireplace is in use. Wait for fireplace to cool completely before starting project.
TECHNICAL DATA:	Color/Form: Cream colored putty. Coverage: approx. 30-50 sq. ft. per gallon at 1/8” dry depending on the porosity of the surface and the contaminants to be removed. Packaging: One gallon containers Storage Requirements: 50°-100°F ABR Waterless Fireplace Cleaner™ freezes at 32°F. If ABR Waterless Fireplace Cleaner™ freezes it will no longer be usable.
SURFACE PREPARATION:	User shall determine the suitability of the product for its intended use and assumes all risk and liability whatsoever in connection therewith. A test area should be performed before beginning project to ensure product compatibility with your specific surfaces. Apply in an inconspicuous location and allow to thoroughly dry, then test the ABR Waterless Fireplace Cleaner™ for ease of removal and overall results. This is especially important when temperatures are approaching or above 80°F as the ABR Waterless Fireplace Cleaner™ may cure in only a few hours.
APPLICATION:	Before beginning application, mask off your work area and using drop clothes or plastic sheeting, cover all adjacent surfaces to protect from coating splatter. Use masking tape to adhere a plastic drop cloth around the base of the fireplace. Take extra precautions to protect all wood surfaces and fabric/carpet as this product may stain wood and can not be easily removed from fabric/carpet. 1. Apply to a dry surface at a consistent temperature of 50°F or higher. 2. Apply a liberal coat about 1/8” thick around the fireplace door. 3. Use a roller with a 4, 7, or 9 x 1/2” knit cover, roll a generous amount of ABR Waterless Fireplace Cleaner™ on the rest of the surface. 4. Give a thick coat to the edge. This will allow for an easy start to peeling off the dried film. Thin applications (less than 1/8” thick) may result in difficulties during removal such as premature tearing of the film. 5. The heavy black soot on your fireplace may need to be agitated with a short bristle nylon scrub brush. Work the coating into the surface while wet. Brush or roll a second coat of ABR Waterless Fireplace Cleaner™ over the scrubbed area for a uniform thickness to help aid in removal. 6. The ABR Waterless Fireplace Cleaner™ does not require water in its application or removal; however, it is not water incompatible. In very dry climates or on porous surfaces you may find it helpful to agitate a heavily soiled area with a water dampened brush to prevent premature drying. 7. Depending on how much product is in the mortar joints, wait 6-12 hours to remove the film. The film MUST be completely dry before removal begins. Test the thick coat on the edge for complete dryness. Coating must be removed within 72 hours. 8. Start at the edge and roll up the film as you go, taking care not to tear. Pull the film off at an angle. 9. When film is completely removed and your work area cleaned of all product, your fireplace can be used. NOTE: To ensure the ease of removal, remove from the surface within 3 days of the initial date of application. Allowing the ABR Waterless Fireplace Cleaner™ to remain on a heavily textured surface for longer may make the removal of the film difficult. Thin applications of ABR Waterless Fireplace Cleaner™ may be difficult to remove and may require the use of the ABR Citrus Paint Remover Liquid®.
COVERAGE:	Coverage: approx. 50-75 sq. ft. per gallon at 1/8” dry depending on the porosity of the surface and the contaminants to be removed.
DISPOSAL:	Dispose of all application tools into the trash. Dispose of latex film in accordance with local latex paint guidelines. Do not pour product down the drain or clean tools in a sink. The product will clog your drain.
FINE PRINT:	Read about warranties, notices, and technical services here: https://www.abrp.com/wp-content/uploads/2017/05/SpecSheet_FireplaceCleaner.pdf

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Material Safety Data Sheet

https://www.abrp.com/wp-content/uploads/2017/05/FIREPLACECLEANER-MSDS.pdf