- Dissolves efflorescence, lime and calcium base paints often found on old historical landmarks.
- Removes excess mortar from brick work.
- A slow evaporating thick gel that clings to the surface, allowing it to penetrate and remain on the surface longer making a single application more efficient than repeated applications of a liquid acid.
- Contains metal inhibitors to control metallic staining.
- Will not etch glass, yellow mortar joints or bleach colored and/or natural joints when used in accordance with directions.
-
-
- A clear acrylic coating designed to mask door and window glass.
- Used on interior or exterior painted or unpainted surfaces.
- Will adhere to wood (new construction) and painted surfaces but is easily removed from glass.
- Eliminates the need to mask the frame, grill work and sash of windows or doors with traditional paper and masking tape.
- Application to door and window frames using a roller, brush or airless sprayer.
-
- ABR® Glass De-Etcher is a polishing compound that removes hydrofluoric acid burn stains from glass.
- X-19 Glass Cleaner & Restorer is an acidic blend of wetting agents and detergents especially formulated to restore glass surfaces.
- ABR® Glass De-Etcher and X-19 Glass Cleaner & Restorer remove hard water marks and stains caused by run-off from unsealed masonry, airborne pollution and acid rain haze that causes oxidation to glass.
-
- Removes light oxidation stains and restores the brilliance to metal, and clean fiberglass surfaces exposed to the environment.
- A cleaner recommended to polish oxidation stains on aluminum diamond plate, cast, rolled and machined aluminum as well as copper, bronze, brass, nickel and other precious metals and fiberglass.
- For heavy oxidation and deeply embedded stains apply with fine steel wool or use the appropriate ABR® Restoration Cleaner — ABR®-50 Rust Remover, Copper & Brass Cleaners or AC-8 Aluminum Brightener Cleaner.
- A rubbing compound used with a damp cloth or rotary buffer.
-
- A penetrating, stain resistant, water repellent sealer for polished and unpolished marble, granite, slate travertine, mosaics, onyx, and sandstone.
- Can also be applied to paint, caulk, grout, EFIS (exterior insulation and finish systems), Dryvit® or stucco and is suitable for both interior and exterior use.
- Enhanced with UV absorbers.
- Penetrates deep into sub-straight to form an invisible, non-film forming barrier that is resistant to oil, water, grease, coffee, cola, food stains, and solvent based markers.
-
- An acrylic liquid polymer specially formulated for use in cement base mixes.
- Provides a tough, self-cured surface for dense concrete and masonry that ensures the highest bonding qualities in tuck-pointing mortars, improves adhesion, increases bonding, reduces cracking.
- Use for regular weight and light weight spray applied coatings, traditional trowel applied stuccos, terrazzo, floor surfaces, basement waterproof, coatings and underlayments.
- For interior and exterior applications.
-
- A concentrated, water soluble cleaner designed to restore bare aluminum, remove oxidation from painted aluminum, and clean aluminum chalk run off on masonry.
- A complete cleaning process may require the use of ABR® Metal & Fiberglass Polish, followed by POLYShield® Regular.