ABR® Waterless Cleaning Poultice

Sorry, this product cannot be purchased.

For: Exterior and Interior stone, brick, tile, and various masonry

Cleaning coating designed to remove dirt, grime, soot and years of environmental pollutants from surfaces where a waterless cleaning method is needed.
Easy-to-use three step process—Paint on. Let it dry. Peel the dirt away.
Apply to both interior and exterior textured stone, limestone, sandstone, marble, granite, slate, terra cotta, ceramic, terrazzo, concrete, tile, brick, plastic, painted or bare metal.
Coverage: 30 to 50 sq. ft./gal. at 1/8”- 1/4″.

Description

ABR Waterless Cleaning Poultice™ is a temporary cleaning coating designed to remove dirt on a wide variety of surfaces, both interior and exterior where an unconventional cleaning method is needed. This removable coating requires no water in its application or removal. ABR Waterless Cleaning Poultice™ collects dirt and contaminants removed from the substrate surface within the coating for easy collection and disposal. ABR Waterless Cleaning Poultice™ may be used on interior and exterior surfaces including, but not limited to, painted or bare metal, brick, textured stone, concrete, marble, ceramic, terrazzo, slate, limestone, granite, tile and plastic. The creamy consistency and opaque color of the ABR Waterless Cleaning Poultice™ allows for an even and “easy to see” application.

See our ad in Building Services Management Magazine.

Additional information

PRECAUTIONS:	LATEX ALLERGY NOTICE: ABR Waterless Cleaning Poultice™ contains latex (a natural fluid produced by the rubber tree) and may cause allergic reactions in some people. Symptoms include an itchy rash, redness, blisters and scaling, or in more severe cases, dropping blood pressure, swelling of the throat and tongue and difficulty breathing. Seek immediate medical attention if symptoms persist. ABR Waterless Cleaning Poultice™ is blended with special additives designed to remove a wide variety of stains created by the accumulation of dirt and other atmospheric contaminants. ABR Waterless Cleaning Poultice™ is available in three (3) manufactured strengths: Type A – suitable for use in most interior applications where light to moderate pollutants and/or dirt accumulation is present. Type B – suitable for use in most interior or exterior applications where moderate to heavy pollutants and/or staining is present. Type C – suitable for use in most interior or exterior applications where heavy or deeply embedded pollutants and/or staining is present. Type D – (Custom Blend) Contact our technical support team for a custom evaluation of your specific project.
TECHNICAL DATA:	Color/Form: Cream colored viscous liquid.
COVERAGE:	Approximately 50-75 sq. ft. per gallon at 1/16”dry depending on the porosity of the surface and the contaminants to be removed. Packaging: Five gallon containers Storage Requirements: 50°-100°F ABR Waterless Cleaning Poultice™ freezes at 32°F. If ABR Waterless Cleaning Poultice™ freezes it will no longer be usable.
INSTALLATION LIMITATIONS:	ABR Waterless Cleaning Poultice™ should not be applied when the air or surface temperature is below 50°F, or if rain or heavy moisture is forecasted. Do not use on carpeting or fabric. Do not use on any stained wood surface as discoloration may occur. Do not thin.
SURFACE PREPARATION:	User shall determine the suitability of the product for its intended use and assumes all risk and liability whatsoever in connection therewith. A test area should be processed prior to beginning the overall project to determine precise procedures necessary for most effective results and compatibility to surface being treated. Allow the test area to thoroughly dry then test the ABR Waterless Cleaning Poultice™ for ease of removal and overall results. This is especially important when temperatures are approaching or above 80°F as the ABR Waterless Cleaning Poultice™ may cure in only a few hours.
APPLICATION:	Surface must be dry. 1. Apply at a temperature of 50°F or higher. 2. Apply a liberal 1/16” thick coat to the surface with a brush, spatula, roller or designated airless spray equipment. Apply evenly to avoid a thin, feathered edge. 3. For best results, agitation of the surface immediately after application will increase the cleaning action. While the product is wet agitate the surface with a stiff synthetic brush, especially over heavily soiled areas. Dirt and grime will be pulled into the ABR Waterless Cleaning Poultice™ while agitation takes place. After agitation, smooth the surface with additional ABR Waterless Cleaning Poultice™ to create an even film. Spray applications of ABR Waterless Cleaning Poultice™ can be made using an appropriate airless texture sprayer with a max working pressure of 3300psi, a tip size 27/1000 to 33/1000 depending on desired coating thickness. 4. The ABR Waterless Cleaning Poultice™ does not require water in its application or removal; however, it is not water incompatible. For example, you may find it helpful to agitate a heavily soiled surface with a water dampened brush to prevent premature drying. 5. Allow the ABR Waterless Cleaning Poultice™ to fully dry a minimum of 6 hours on the surface. Depending on substrate and amount of contaminates to be removed a 12 to 72 hour curing time may be required. 6. To remove the dried ABR Waterless Cleaning Poultice™, start at a corner and peel the film away from the surface. 7. Following removal, wipe down treated areas with a damp sponge to remove any remaining residue. NOTE: To ensure the ease of removal, remove from the surface within 3 days of the initial date of application. Thin applications of ABR Waterless Cleaning Poultice™ may be difficult to remove and may require the use of the ABR Citrus Paint Remover Liquid®
DISPOSAL:	CLEAN UP & DISPOSAL: Rinse brush, roller or sprayer in a pail with water and dish detergent. Do not pour down drain. Dispose of in accordance with state, local, and federal regulations.
FINE PRINT:	Read about warranties, notices, and technical services here: https://www.abrp.com/wp-content/uploads/2017/05/SpecSheet_Poultice_ABRP.pdf

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.