Building Wash 3

Building Wash 3

  • Versatile one step building cleaner designed to remove surface dirt, and paint oxidation from painted and non-painted surfaces without brushing when used with high pressure washing equipment.
  • Cleans brick, metal, plastics, vinyl, and painted aluminum siding.
  • Works well with pressure washer, steam cleaner or manual washing in hot or cold water.
  • Biodegradable, contains NO phosphates, caustics or acid, and will not etch glass.

COVERAGE: 250 to 300 sq. ft./gal. without dilution.
* CONCENTRATE: 1 gallon makes 10 ready-to-use gallons. May be used up to a 1:10 dilution, covering up to 3,000 sq. ft. per gallon, for light cleaning.

Description

Building Wash 3 is a versatile one step building cleaner designed to remove surface dirt and paint oxidation from painted and non-painted surfaces without brushing when used with pressure washing equipment.

 

Product Specifications
MATERIAL SAFETY DATA SHEET

 

 

Additional information

SURFACE PREPARATION:

A test area should
be performed on each type of surface prior to overall
cleaning. Allow test areas to dry thoroughly before
determining results. Adjust strength based on tests.
User shall determine the suitability of the product
for its intended use and assumes all risk and liability
whatsoever in connection therewith.

APPLICATION:

1. To avoid streaking, always pre-wet surface to be cleaned. 2. Spray or brush Building
Wash 3 onto surface. (May be used up to 1:10 dilution
for light cleaning or use with brush.)
3. All surfaces should be thoroughly rinsed with clean water.
NOTE: For most painted surfaces, use Building Wash
3 with hot water and at least 500 psi pressure. For
best results on a vertical surface, apply Building
Wash 3 from bottom up. Pressure rinse from bottom
up. Conclude with a final rinse from top down.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.