Contact Us Today! 1.800.346.7532|abrp@abrp.com
FacebookTwitterYouTubeRssEmail

ABR Liquid Shield®

ABR Liquid Shield®

  • A clear acrylic coating designed to mask door and window glass.
  • Used on interior or exterior painted or unpainted surfaces.
  • Will adhere to wood (new construction) and painted surfaces but is easily removed from glass.
  • Eliminates the need to mask the frame, grill work and sash of windows or doors with traditional paper and masking tape.
  • Application to door and window frames using a roller, brush or airless sprayer.

COVERAGE: 200 to 250 sq. ft./gal.

Category:

Description

ABR Liquid Shield® is a clear, removable acrylic coating designed to mask door and window glass. ABR Liquid Shield® will adhere to wood (new construction) and painted surfaces but is easily removed from glass and metal. ABR Liquid Shield® can be used on interior or exterior painted and unpainted surfaces.

Product Specifications
Material Safety Data

Additional information

SURFACE PREPARATION:

The user shall
determine the suitability of the product for its intended
use and assumes all risk and liability whatsoever
in connection therewith. A test area should be
processed before beginning the overall project. Allow
the test area to dry thoroughly. Then test the ABR
Liquid Shield® for ease of removal. Glass should be
clean and dry and free of cuts, scrapes, oil, dirt or
other foreign materials prior to applying ABR Liquid
Shield®. Failure to remove any surface dirt or grease
will greatly reduce adhesion. Do not topcoat or cover
ABR Liquid Shield® with lacquers, primers or paints
containing ketones or alcohols. Do not topcoat with
alkyd or oil base paint unless thoroughly dry. Prime steel frames before topcoating with ABR Liquid
Shield®.
APPLICATION:

SPRAYING EQUIPMENT: Spray ABR Liquid Shield®
with a conventional, an airless or a HVLP sprayer,
testing sprayer before use. A conventional sprayer
should be set-up for use with a thick latex paint.
An airless sprayer should be used at approximately
2500 psi with a 411-513 tip. A HVLP sprayer should
be set-up for use with a thick latex paint, pressurize
the cup or pot if possible. When applying ABR Liquid
Shield® to a previously painted surface, follow the
recommended procedures: 1. Remove loose paint by
sanding or scraping. 2. If painted surface is glossy, use
sand paper or deglossing agent. 3. If painted surface
is chalky, wash the area with a scrub brush and water.
APPLICATION: 1. Mix ABR Liquid Shield® well before
use. Do not thin or mix with additives. 2. Apply a
coat 5-6 mils wet (2-4 mils dry) to the surface with
a synthetic brush or sprayer. Spray a light coat using
a horizontal path, then spray a light coat using a
vertical path. Immediately smooth out any running or
sagging if it occurs. 3. Allow material to fully dry on
the surface. See dry time below. 4. To remove ABR
Liquid Shield®, start at a corner and using a utility
knife, very carefully cut the mask taking care to not
cut or scrape the glass, then peel off the film. If ABR
Liquid Shield® does not peel off in one sheet, the film
is to thin. Apply a second coat of ABR Liquid Shield®
and allow too dry before removing.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products

Title

We are a manufacturer of specialty building restoration and preservation products, with over 47 years of experience. Restoring the old, preserving the new. Made in America.

Learn More
Go to Top