POLYShield® Graffiti Preventer Type B (for unpainted masonry)

POLYShield® Graffiti Preventer Type B (for unpainted masonry)

  • Formulated to prevent graffiti from penetrating and staining unpainted masonry surfaces.
  • Can be applied to all unpainted surfaces, including: brick, natural stone, concrete, and stucco.

COVERAGE: Painted surfaces–250 to 500 sq. ft./gal. depending on the surface finish. Unpainted masonry–100 to 300 sq. ft./gal. depending on the finish and porosity of the surface.

Description

 

PolyShield® Graffiti Preventer Type B is a sacrificial coating, formulated to prevent graffiti from penetrating and staining unpainted masonry surfaces. The invisible PolyShield® Graffiti Preventer Type B barrier acts as a shield, preventing absorption of vandalistic harm into the substrate. It is recommended to apply the PolyShield® Graffiti Preventer Type B to graffiti free surfaces. PolyShield® Graffiti Preventer Type B can be applied to all unpainted surfaces including brick, natural stone, concrete, and stucco. PolyShield® Graffiti Preventer Type B is designed for interior and exterior use.

NOTE: Quick and complete removal of graffiti tags will discourage and diminish further vandalism.

TECHNICAL DATA:

Color/Form: Opaque tan liquid.

Coverage: 100-300 sq. ft. per gallon for unpainted masonry, depending on the porosity of the surface.

Packaging: One, five, and 55 gallon containers.

GRAFFITI REMOVAL BEFORE AND AFTER TREATMENT:
When removing existing graffiti, ABRP, Inc offers a
complete line of graffiti removal products:
• Super Bio Strip®
• 800 Fast Acting
• Tag Zap® Removers
• PolyShield® Strip Soap

Product Specifications
Material Safety Data

Additional information

SURFACE PREPARATION:

All surfaces
should be free of any existing graffiti as well as any
dust or other surface contaminates. A test area should
be processed before beginning the overall project. If
not satisfied with the result, remove immediately
with water and start over. The user shall determine
the suitability of the product for its intended use and
assumes all risk and liability whatsoever in connection
therewith.

APPLICATION:

: 1. Mix PolyShield® Graffiti Preventer
Type B well before use. Do not thin or mix with
additives. 2. Apply PolyShield® Graffiti Preventer
Type B with a brush, a HVLP sprayer or low pressure
hand pump sprayer. 3. Use light spray passes in
opposite directions to apply a first coat taking care to
back-brush any drips or runs. 4. Allow material to dry
for 10 minutes before applying the second coat.
DRYING TIME: 24 hours Clean Up: soap and water
REAPPLICATION: If PolyShield® Graffiti Preventer
Type B is removed during the graffiti removal process,
a reapplication of one coat of the PolyShield®
Graffiti Preventer Type B will only be required to
the removed area.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.