ABR Strip It-All®

ABR Strip It-All®

  • Water soluble gel removes multiple layers of latex paints, stains, varnishes, linseed oils and other coatings.
  • Removes finishes from all types of surfaces, including masonry.
  • Requires neutralizing.

COVERAGE: 50 to 100 sq. ft./gal., depending on layers of paint.

Category:

Description

ABR StripIt-All® is a water soluble gel designed to remove multiple layers of latex paints, stains, varnishes, linseed oils and other coatings that hide the original color and texture of wood. ABR StripItAll® allows you to start over from the beginning by restoring wood to the condition of new lumber before treating the wood with a new finish. (See X-100 Natural Seal® for a finish/wood preservative). ABR StripIt-All® removes finishes from all types of surfaces, including masonry and metal. ABR StripItAll® requires neutralizing.

Color/Form: brown gel.

Coverage: 75 to 100 sq. ft. per gallon (1-2 coats of stain). 50 to 75 sq. ft. per gallon (1-2 coats of latex paint or varnish). 50 sq. ft. per gallon (combination of 1-3 coats of latex paint and/or oil paint). Packaging: one, five and fifty-five gallon containers.

Product Specifications
MATERIAL SAFETY DATA SHEET

Additional information

INSTALLATION:

Preparatory Work: it is important to
prepare a surface for proper adherence of
ABR StripIt-All®. If dirt or a heavy chalk
film is present, rinse the surface with water.
Prior to beginning the overall project, a test
should be performed to determine the
optimum dwell time required for ABR
StripIt-All® to completely penetrate all
layers of the finish. The user shall determine
the suitability of the product for its intended
use and assumes all risk and liability
whatsoever in connection therewith.
Example: time required for 1 layer of stain
or paint may be 30 minutes. Difficult jobs
consisting of multiple layers of paint may
require leaving ABR StripIt-All® on test
panels for 3 to 4 hours.

APPLICATION:

1. Using a synthetic brush, roller, low
pressure sprayer or airless paint sprayer,
apply a thick coat of ABR StripIt-All® to
the surface.
Caution: ABR StripIt-All® is slippery
when applied to the surface. Use extreme
caution when working on horizontal
surfaces.
2. Let ABR StripIt-All® remain on
the surface until all paint or solid color stain
has softened. To prevent premature rinsing,
wait for the entire surface to become
uniformly darkened. This darkened
appearance indicates that the ABR StripItAll®
has dissolved the underlying finish and
is ready to be rinsed.
3. If ABR StripIt-All® has to remain
on the surface for 30 minutes or longer, it
may dry prematurely. In this instance,
moisten dry areas by applying a 50/50
water/ABR StripIt-All® mix. Then, mist the surface with a fine water spray. A
reapplication may be necessary for
overhangs, corners, windows and the
like where ABR StripIt-All® tends to
move downward and away, therefore
reducing the product effectiveness.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.